Pansat 3500SD
As Low As $149.99!!
The Pansat 3500SD is one of the latest additions to the remarkable line of Pansat products. Consumers have been salivating at the chance to purchase this unit. Anticipation has been at an all time high. Update this receiver in 10 seconds using the SD card slot( 16 Mb SDRAM MEMORY)! Fully working (instant) extended program guide (EPG). Play MP3's and it is fully compliant with MPEG-2 Digital & DVB broadcasting. FTA receiver comes with 128MB SD memory Card. The Pansat 3500SD FTA digital receiver is the newest 2007 model from Pansat with already build in card reader. New features include 2mb memory,100 satellite programmable, 5000 channel memory, universal remote, component video out, SD memory card slot, and a Conax embedded smart card slot. This receiver is one of the best receivers available in North America!
| $ 159.99 (ea.) |
1 Receiver |
|
$ 154.99 (ea.)
SAVE $5!! |
2~4 Receivers(s) |
|
$ 149.99 (ea.)
SAVE $10!! |
5+ Receiver(s) |
|
- Fully MPEG2, DVB compliant
- C/Ku band control for each antenna
- Digital Audio with AC-3 support by SPDIF
- PIG (Picture In Graphic) support
- Provide friendly and easy-to-use menu system
- Various channel editing function
(favorite, moving, locking, renaming, deleting and sorting)
- User programmable various satellite & transponder information
- Automatic search for newly added transponder (Network Auto Search)
- Stores up to 5000 channels
- Easy and speedy software upgrade through RS-232 port
- Plug-and-play data transfer system (DSR to DSR)
- Timer function, automatically turns On/Off by setting function
(daily, weekly, monthly and one time)
- Automatic reserved channel moving system
- Provide Electronic Program Guide (EPG)
- Support for various video output : CVBS, COMPONENT, S-VHS
- Provide various switch types, LNB types and NTSC/PAL monitor type
- SCPC/MCPC receivable from C/Ku band satellite
- Multi LNB controlled by DiSEqC 1.0, 22KHz and 0/12 volt switching
- PAL/NTSC automatically conversion
- Last channel automatically saving
- Capable of descrambling encrypted programs by Conax using built-in Conax descrambler(CX only)
| Tuner/Channel |
Top
 |
| Input Connector |
F-type, IEC 169-24 |
| IF Input Frequency |
950MHz to 2150MHz |
| IF Loop Throughout |
950MHz to
2150MHz |
| IF Frequency |
Zero-IF |
| Input Level |
-65 dBm ~ -25 dBm |
| LNB Power |
13/18VDC/500mA Max |
| DiSEqC Control |
Version 1.3 Compatible |
| Band Switching |
22KHz Tone |
| Demodulation |
QPSK |
| System Rate |
1~45 Msps (SCPC, MCPC) |
| Viterbi Decoding Rate |
1/2, 2/3, 3/4, 5/6, 7/8 |
| Reed Solomon Decoding |
FEC:204, 188, t=8 |
| DiSEqC |
1.3 Compatible (STAB
USALS) |
| MPEG Transport Stream & A/V Decoding |
| Top
|
| Demultiplex |
According to ISO/IEC
13818-1 |
| Input Stream |
Max. 90Mbit/s |
| Aspect Ratio |
4:3, 16:9 |
| Video Resolution |
720 x 576 PAL
720 x 480 NTSC |
| Audio Decoding |
MPEG Layer I &
II |
| Audio Mode |
Single/Dual channel, Stereo, Joint Stereo |
| Audio Sampling Frequency |
16/22, 05/24/32/44.1,
48kHz |
| Microprocessor & Memories |
| Top
|
| Main Processor |
STi 5518 BVB, ST20 32
bit |
| CPU Clock |
81 MHz (100 MIPS) |
| Flash Memory |
2 Mbyte |
| SDRAM |
16 Mbyte |
| EEPROM |
32 kbit |
| Data Port |
| Top
|
| Connector |
9 pin D-sub
type |
| Protocol |
RS232 Asynchronous |
| Data Rate |
Max. 19,2kbps |
| RF-modulator |
| Top
|
| RF-Connector |
750 Ohm, IEC 169-2
Male/Female |
| Frequency |
CH 3:61.25 MHz Ch4:67.25 MHz |
| Output Channel |
CH 3-4 for the
Remodulator |
| TV Standard |
NTSC-M |
| Preset Channel |
changeable by
Menu |
| Front Panel |
| Top
|
| 4 Digits LED Display |
Channel number
display |
| 8 keys |
Power, Channel up/down, Volume up/down, OK, Exit,
menu |
| Rear Panel |
| Top
|
| IF Input |
F-type connector |
| IF Loopthrough output |
F-type connector |
| 4 Phono (Cinch) |
Video, Audio L, Audio R, S/PDIF |
| Skew |
|
| S-VHS |
|
| Modulator |
|
| RS232 Serial Port |
9-pin D-sub Type |
| Y/Pb/Pr Digital Component Video Out |
|
| Remote Control |
| Top
|
| Type |
Infra-red
(carrier-freq: 38 KHz) |
| Battery |
2 x 1.5V AAA Type |
| Power Supply |
| Top
|
| Input voltage |
AC 90 to 250V~50/60 Hz |
| Power Consumption |
Max. 25W |
| Standby Power |
<5W |
| Physical Specification |
| Top
|
| Size |
290 x 200x 65mm |
| Weight (net) |
2.1kg |
