Pansat 2700A
As Low As $134.99!!
The Pansat 2700A replaces the highly popular Pansat 2500 Digital Satellite Receiver. It is the latest receiver in a long line up of high quality receivers dating back to 80s. Its got a lot more memory for future condiseration (5000 channel memory), along with 2mb of flash RAM (faster channel changing over last years model) and EPG!
| $ 134.99 (ea.) |
1 Receiver |
|
$ 129.99 (ea.)
SAVE $5!! |
2~4 Receivers(s) |
|
$ 124.99 (ea.)
SAVE $10!! |
5+ Receiver(s) |
|
- EPG (Electronic Program Guide)
- Full Compliant of MPEG-2 Digital & DVB broadcasting
- 950-2,150 MHz input Frequency (IF Loop Throughout)
- Variable Input Symbol Rate (1-45 Msps)
- Multi Language OSD
- Automatic PAL/NTSC Conversion
- Fast Channel Change
- 5,000 Channels TV & Radio Program
- Flexible reception of SCPC & MCPC from C/Ku-Band Satellites
- S/PDIF (Digital Audio or Dolby AC3 Stream out)
- Timer Function (Automatic Turn On/Off by Setting Function)
- 256 Colors (Graphic User Interface) Number
- PIG (Picture In Graphic)
- 5 Favorite List & Unlimited Programs per each
- Powerful Channel Editing Function
- Sorting : Alphabetic, Satellite, FTA/Scramble, Parental Lock
- Move, Delete, Favorite Edit
- Parental Lock, Channel Rename, Channel Skip
- Manual PID / Satellite & TP / Network Scan
- Smart Search
- Satellite Scan – Simultaneous Scan with 4 Satellites
- DiSEqC 1.3 Control Compatible (STAB USALS)
- Capable of Setting the Frequency for SMATV System
- Software Upgrade via RS-232C (Receiver to Receiver, PC to Receiver)
| Tuner/Channel |
Top
 |
| Input Connector |
F-type, IEC 169-24 |
| IF Input Frequency |
950MHz to 2150MHz |
| IF Loop Throughout |
950MHz to 2150MHz |
| IF Frequency |
Zero-IF |
| Input Level |
-65 dBm ~ -25 dBm |
| LNB Power |
13/18VDC/500mA Max |
| DiSEqC Control |
Version 1.3 Compatible |
| Band Switching |
22KHz Tone |
| Demodulation |
QPSK |
| System Rate |
1~45 Msps (SCPC, MCPC) |
| Viterbi Decoding Rate |
1/2, 2/3, 3/4, 5/6, 7/8 |
| Reed Solomon Decoding |
FEC:204, 188, t=8 |
| DiSEqC |
1.3 Compatible (STAB
USALS) |
| MPEG Transport Stream & A/V Decoding |
| Top
|
| Demultiplex |
According to ISO/IEC 13818-1 |
| Input Stream |
Max. 90Mbit/s |
| Aspect Ratio |
4:3, 16:9 |
| Video Resolution |
720 x 576 |
| Audio Decoding |
MPEG Layer I & II |
| Audio Mode |
Single/Dual channel, Stereo, Joint Stereo |
| Audio Sampling Frequency |
16/22, 05/24/32/44.1, 48kHz |
| Microprocessor & Memories |
| Top
|
| Main Processor |
STi 5518 BVB, ST20 32 bit |
| CPU Clock |
81 MHz (100 MIPS) |
| Flash Memory |
2 Mbyte |
| SDRAM |
8 Mbyte |
| EEPROM |
32 kbit |
| Data Port |
| Top
|
| Connector |
9 pin D-sub
type |
| Protocol |
RS232 Asynchronous |
| Data Rate |
Max. 19,2kbps |
| RF-modulator |
| Top
|
| RF-Connector |
IEC 169-2 Male/Female |
| Frequency |
470MHz to 860MHz |
| Output Channel |
CH 3-4 for the Remodulator |
| TV Standard |
NTSC |
| Preset Channel |
changeable by Menu Screen |
| Front Panel |
| Top
|
| 4 Digits LED Display |
Channel number display |
| 3 keys |
Power, Channel up/down |
| Rear Panel |
| Top
|
| IF Input |
F-type connector |
| IF Loopthrough output |
F-type connector |
| 4 Phono (Cinch) |
Video, Audio L, Audio R, S/PDIF |
| Skew |
3 Push Terminal (5V, GND, Pulse |
| S-VHS |
Super Video Output |
| Modulator |
|
| RS232 Serial Port |
9-pin D-sub Type |
| Y/Pb/Pr Digital Component Video Out |
|
| Remote Control |
| Top
|
| Type |
Infra-red
(carrier-freq: 38 KHz) |
| Battery |
2 x 1.5V AAA Type |
| Power Supply |
| Top
|
| Input voltage |
AC 90 to 250V~50/60 Hz |
| Power Consumption |
Max. 25W |
| Standby Power |
<5W |
| Physical Specification |
| Top
|
| Size |
290 x 200x 65mm |
| Weight (net) |
2.1kg |
